0.96″ OLED Display Module 128×64 SSD1306 – I2C/SPI White Blue Blue-Yellow | 4-Pin & 7-Pin

A compact and high-contrast 0.96″ OLED display module (128×64) powered by the popular SSD1306 driver. Available in White, Blue, and Yellow-Blue variants, this display delivers sharp visuals with excellent readability, even in low-light conditions.

With both 4-pin (I2C) and 7-pin (SPI/I2C) variants available, it is perfect for Arduino, ESP32, Raspberry Pi, and other embedded systems.

Available variants

• Colours: White / Blue / Yellow-Blue
• Interface options:
  • 4-pin – I2C interface (VCC, GND, SCL, SDA)
  • 7-pin – SPI/I2C interface (more control options)

Key features

• 128 × 64 resolution OLED display
• SSD1306 driver (widely supported)
• No backlight required – self-emissive pixels
• High contrast and wide viewing angle
• Low power consumption
• Compatible with popular libraries (Adafruit, U8g2)

Interface options

4-pin (I2C)

• VCC – Power (3.3V / 5V)
• GND – Ground
• SCL – Clock
• SDA – Data

7-pin (SPI/I2C)

• VCC – Power
• GND – Ground
• D0 (SCL) – Clock
• D1 (SDA/MOSI) – Data
• RES – Reset
• DC – Data/Command
• CS – Chip Select

Specifications

Common applications

• Arduino and ESP32 display projects
• IoT dashboards and status screens
• Sensor data visualisation
• Wearable electronics
• DIY gadgets and user interfaces

Important notes

• I2C address is typically 0x3C (may vary)
• 7-pin version requires additional wiring compared to I2C
• Ensure correct library configuration for your interface

Tip: The 4-pin I2C version is recommended for beginners due to its simple wiring and wide library support.